Add to wishlist

KVP 2.25″ Magnum Linear Comp

$59.95

The Magnum Linear Comp is machined from carbon steel, QPQ Black Nitride finished, and can be used in any rifle cartridge application. Magnums are a larger form factor comp, for use in pistol and rifle builds. The Magnum Linear Comp fills the gap that the XL Linear Comp family couldn’t fill. (XL Linear Comps PCC only) The hexagonal flats allow for easily accessible wrench flats down the entire body of the comp. Installation and removal of the Magnum Comp is a breeze, even while partially installed under a hand guard.

Add to wishlist
SKU: KVP-MAG-225 Categories: ,

Kaw Valley Precision Linear Comps are part of a small family of compensators aimed at taming muzzle concussion. The KVP Magnum Linear Comp, collects and redirects muzzle gases away from the shooter. This redirection helps reduce the perceived decibels the shooter experiences at his or her ear. By pushing excessive noise and concussion downrange, not only will the shooter experience a much softer shooting experience, bystanders will also benefit from the redirection of the muzzle gasses. Kaw Valley Precision has been a part of many successful applications of our linear comps in many shooting disciplines including: CQC (close quarters combat), Competitive Shooting, Varmint Hunting, Law Enforcement, and Indoor Ranges to name a few.

The Magnum Linear Comp is machined from carbon steel, QPQ Black Nitride finished, and can be used in any rifle cartridge application. Magnums are a larger form factor comp, for use in pistol and rifle builds. The Magnum Linear Comp fills the gap that the XL Linear Comp family couldn’t fill. (XL Linear Comps PCC only) The hexagonal flats allow for easily accessible wrench flats down the entire body of the comp. Installation and removal of the Magnum Comp is a breeze, even while partially installed under a hand guard.

NO CRUSH WASHER NEEDED FOR INSTALLATION
   – Torque to 15 ft lbs.

2.25″ Magnum Features:

  • Thread Variants: 1/2×28 TPI, 5/8×24 TPI (.30Cal OR .45ACP), 5/8×32 TPI, 11/16×24 TPI
  • Overall Length: 2.25″
  • OD: 1.275″
  • Caliber: Various Caliber Applications based on barrel thread
  • Material: Carbon Steel
  • Weight: 4.8oz – 4.9oz
  • Heat Treatment: Melonite QPQ
  • Surface Finish: QPQ Black Nitride

 

Weight 0.2 lbs
Linear Comp Thread

, , , ,

31 reviews for KVP 2.25″ Magnum Linear Comp

  1. Robert –

    Amazing linear comp, works as advertised~ Will buy again in a heartbeat!

  2. Phil Whitehead –

    Bought for a customer, but have gotten them for myself in the past. Exceptional quality and price.

  3. Walden Arms, LLC –

    Our shop tried several different comps on the Ruger American Ranch 450. They all sucked more or less until we put this Comp on which also allowed us to shoot the rifle without hearing protection.

  4. Michael Wallace –

    Fits nicely as a a alternative to the front of the first Generation Roni design.

  5. Jason –

    Love it

  6. Andrew Ferraro –

    Great overall company and products. I had a tracking issue. Email service they got right back to me. They were aware of the problem and fixed it already. Got product the next day. Will be a return customer.

  7. Casey Essary –

    This nestled right in my AR pistol perfectly flush to the end of the handguard.

  8. Mark Gomez –

    Received my Magnum Linear Comp and I love it, the fit and finish is excellent and I would definitely be buying more products in the future!

  9. Hayden Huff –

    Received the comp pretty quick. It is exactly the fit I wanted.

  10. David Fair –

    I have to admit to some surprise in this order. Man, you guys are ON IT. I placed my order in the midst of the Chicom flu craziness and it showed up 3 days later.

    The comp is top shelf. As a machine tool builder I know machining. This was beautiful, machining and finish are perfect.

  11. B. Brown –

    Installed replacing a very nice brake (which will go onto my .308) so I can have a bit longer hand guard. Fit and finish is excellent, function also excellent! Greatly reduces shooter perceived noise.

  12. Eric Nelson –

    Customer service is quick, helpful and on point. I ordered the wrong compensator and I sent them an email that I wanted to exchange. Within an hour or two I got a response and got it taken care of. Product is high quality and shipping is fast. I wish KVP sold everything for guns so I could give them more business!

  13. Michael Martin –

    Machining, threads and fit all flawless. Shipping was very fast. I definitely noticed the difference in the forward flash and reduced concussion. It was much nicer on the ears to shoot. However I bought this for my AR10 and I did notice a recoil increase from the stock rear facing flash hider that was on there. It’s a small trade off. The recoil was not enough to complain about or seriously inhibit getting back on target.

  14. David NaDeau –

    This is one of the best, if not the best, product that I’ve ever put on my rifles, looks great, performs great and at a great price point. Thank you guys for making business a lot easier.

  15. Gino D. –

    Works great! Much quieter than a standard compensator

  16. Lou –

    Perfect size, shape, design, and shipped fast. What more could I want. Will definitely be a repeat customer

  17. anthony costa –

    I was referred over by aero precision for the magnum comp and its great, shipping was super fast! plus I run a slim rail and it fit perfect inside.

  18. Ken St germaine –

    Great service fast shipping

  19. Ronald Tipton –

  20. Michael Garrison –

    Great products and very fast shipping.

  21. Robert Blaylock –

    This is made from high quality materials and preforms great. The shipping was super fast, ordered and received in three days. I recommend this company and their products.

  22. Carlos Strane –

    Good price and very easy shipping and handling to deal with. Very please with the entire process

  23. josh Alford –

  24. David Bandringa –

    Usually use a titanium linear muzzle device. Tried this steel one and I have to say it works a little better. Works great. You guys need to manufacture some for lightweight builds. Your design is one of the best.

  25. Ian Didriksen –

    I Cannot wait to install it when the upper arrives!

  26. William Davison –

    The comp is well manufactured, and machined with good tolerances. The design fits well with a wide variety of AR uppers. Great price, and does what it was designed to do…focus flash and sound away from the shooter. I would recommend it, especially to pistol shooters with 7.5″ barrels. Shipping is a bit slow with USPS.

  27. Maquel –

    I build a lot of AR’s and I put KAW Linear Comps on a lot of them. Quality products and great customer service.
    A combination that’s hard to find these days!

  28. Morgan Jarrett –

    Excellent customer service. Had my item in hand way before they said it would be in.

  29. Ronald Tipton –

  30. Timothy Brown –

    What a great muzzle device… 100% of expectations. Fast shipping and arrived earlier the was expected.

  31. Brett Kelly –

Add a review

Related products

Add to wishlist
Quick View

Linear Comps

KVP MACH 3-Lug Mount

$79.95
Add to wishlist
Quick View

Linear Comps

KVP XL Pistol Caliber Linear Comp

$44.95
Add to wishlist
Quick View

Linear Comps

KVP Slim XL Pistol Caliber Linear Comp

$44.95
Add to wishlist
Quick View

Linear Comps

KVP 3.25″ Magnum Linear Comp

$59.95
Add to wishlist
Quick View

Linear Comps

KVP Mach Linear Comp Spacer

$24.95 – $34.95